Difference between revisions of "Lecture 1. - Assignment"

Revision as of 21:41, 14 March 2019

Purpose of the Assignment

The student will learn the main steps of the finite element method, such as creating the model (creating or importing geometry), specifying material parameters, boundary conditions, and excitation through simulation of the electromagnetic part of fuel injector.

Knowledge needed to solve the problem

• The steps of the finite element method;
• Theoretical knowledge of static magnetic field (for defining materials, for excitation);
• Knowledge of CAD system to create geometry.

Steps to solve the problem

After starting ANSYS AIM, select Electromagnetics by clicking on the Start button. Unlike the steps below, the task can be accomplished. When you use AIM, the messages that appear during the various steps help you in the simulation.

Creating Geometry

The geometry of the problem can be made in SpaceClaim, but also create another CAD software (AutoCAD; SolidWorks; Solid Edge; Catia; Creo; ...). The geometry consists of three parts, the iron core (plunger), the coil, and the cross-section of the coil for excitation.

The height of cylindrical core is 14mm and the radii is 3.6mm. Dimensions of the coil: height is 20mm, innner radii is 4mm and outer radii is 10mm.

Creating Geometry in SpaceClaim

Cross section of the fuel injector solenoid geometry.

To use SpaceClaim properly, the Help menu and videos on YouTube are a great help. Here I will only detail the creation of coil cross section. The presentation and the related practice will present the complete workflow.

First we create a plain in the cross-section of the coil core using the Design - Plane button. Then, in the Structure window, we add a New Component by clicking on Design Component. In the properties of the new component, set Shared Topology to Share and we drag and drop the coil into the new component. Then, as the next step, draw the cross section of the coil using the cross-section plane of the arrangement. If you have drawn the cross section of the coil, it should also be in the tree of the new component. Because of the last step, the ANSYS Discovery AIM will treat the drawn surface as a cross-section of the coil, so this surface will use for excitation. Finally, right mouse button (RMB) clicking on Design Component, and click on Active Component to make the entire geometry active, not just the newly created component. Also, it is possible to parameterize the dimensions of the geometry and their relative position, such as taking into account the movement of the iron core.

If we created the geometry, save it, close SpaceClaim and start ANSYS Discovery AIM, and then select 'Electromagnetics'. Afterwards, Discovery AIM guide us through the complete simulation, so all the steps of the simulation are not detailed.

After importing the geometry, the task type is Electromagnetic, the source is Applied current and DC. The thermal behavior of the task is Constant temperature and select 'Compute force' and 'Compute inductance' as an option. Finally, select 'Create surround automatically'. This option is important if the dimensions or position will change during the simulation.

Defining the Materials, Excitation

We can define the materials by selecting the volumes.

The coil is made of copper (Copper), the core is steel 1008 (Steel 1008). If you want to modify some of their properties (conductivity, curve B-H), you can do it later in the properties of the materials.

To define the excitation, the cross-section of the coil should be selected with a drawn surface, then the current (0.2A) and the number of turns (2000) should be specified. Here you can also define the fill factor for the coil.

After that, we do not take care of discretization and the settings of the solver. The basic settings will be appropriate. Adaptive meshing uses in the solution, so we do not deal with the discreatization for this problem.

Evaluation of Results

Coil inductance and plunger force in the function of plunger position.

Here you can plot the field quatities in the volume or on the surface and checked the vallue of the inductance of the coil and the acting force on iron core. The following values were obtained for these quantities, the arrangement according to the cross-sectional view being 15 mm, and -15 mm displacement of plunger means the 0 mm position.

In addition, it is possible to parameterize different variables (position, size, current, number, ...). The result of a parameterized simulation is shown in the figure where the parameter is the position of the iron core. As a result, the modification of the parameter and the evaluation of results are automatic.

References

1. ↑ https://upload.wikimedia.org/wikipedia/commons/2/29/Injector3.gif